If you want to use X-Box to control camera, you should configure the ZowiePTZ first.
After the X-Box is connected to the computer USB port, you can use X-Box to control the camera directly.
If you want to use X-Box to control camera, you should configure the ZowiePTZ first.
After the X-Box is connected to the computer USB port, you can use X-Box to control the camera directly.
1) Log in to the ZowieCAM web page
2)Click 'Setting->Camera->Image->Start Calibration ,then manually twist the focus ring until it is completely sharp.
3)Then click 'End Calibration'on the web page.
The specific hardware versions and corresponding functions are as follows:
(1) Please use official NDI software, such as NDI monitor, to check whether the NDI source can be decoded normally.
(2) Please check whether the IP address displayed by the NDI source is in the same network segment as the IP address of ZowieBox.
Learn more