After the upgrade, if the LED screen is displayed on the logo interface, the web control interface keeps loading and cannot obtain information after logging in.
Please click Setting->System->DefaultĀ and click Restore Factory Settings.
After the upgrade, if the LED screen is displayed on the logo interface, the web control interface keeps loading and cannot obtain information after logging in.
Please click Setting->System->DefaultĀ and click Restore Factory Settings.
1) Log in to the ZowieCAM web page
2)Click 'Setting->Camera->Image->Start CalibrationĀ ,thenĀ manually twist the focus ring until it is completelyĀ sharp.
3)Then click 'End Calibration'on the web page.
The specific hardware versions and corresponding functions are as follows:
(1) Please use official NDI software, such as NDI monitor, to check whether the NDI source can be decoded normally.
(2) Please check whether the IP address displayed by the NDI source is in the same network segment as the IP address of ZowieBox.
Learn more