Situation 1: Use ZowieBox streaming SRT to vMix.
- Open vMix, click Add Input in the lower left corner, and select Stream | SRT in the pop-up settings box. Select the streaming type as SRT (Listener), enter the required port (not occupied by other devices), and the required passphrase, and click Save.
- Log in to the ZowieBox web control page, click Setting -> Live-> Network Stream, click + Add, change the protocol to SRT, and enter the SRT URL: srt://192.168.1.75:5555?passphrase= 1234567890
*192.168.1.75 is the IP address of the computer where vMix is located; 5555 is the port just set; 1234567890 is the password just set; ?passphrase= is a fixed combination, please do not omit it.
Situation 2: Use ZowieBox to decode the SRT stream of vMix
1.Click Settings in the upper right corner of vMix, select Outputs|NDI|SRT, select the resource needed, and then click the Settings button on the right.
2.Select to enable SRT, change the type to Listener; enter the unoccupied port number and the required passphrase, and click OK.
2.Open the web control interface of ZowieBox, click Setting->System->Working Mode, and switch it to decoder mode.
3.Click Decoder，add a new decodingstream, enter the srt URL: srt://192.168.1.75:5556?passphrase=1234567890 and click Save.
*192.168.1.75 is the IP address of the computer where vMix is located; 5556 is the port just set; 1234567890 is the password just set; ?passphrase= is a fixed combination, please do not omit it.
